Common Well water treatment Processes for Well Water

Sediment Filtration:

Purpose: Removes sand, silt, and other particulate matter.

Process: Well water is passed through a sediment filter, typically a cartridge or media filter, to trap and remove solid particles.

Iron and Manganese Removal:

Purpose: Eliminates excess iron and manganese, which can cause staining and affect water taste.

Process: Oxidation followed by filtration is commonly used, where iron and manganese are oxidized into solid particles and then filtered out.

Water Softening:

Purpose: Reduces hardness caused by high levels of calcium and magnesium.

Process: Ion exchange water softeners replace calcium and magnesium ions with sodium or potassium ions, softening the water.

Carbon Filtration:

Purpose: Removes organic compounds, chlorine (if present), and improves taste and odor.

Process: Well water is passed through activated carbon filters, which adsorb organic contaminants and chlorine.

Reverse Osmosis (RO):

Purpose: Provides high-level purification by removing dissolved solids, heavy metals, and other contaminants.

Process: Water is forced through a semipermeable membrane, which blocks contaminants and allows only clean water to pass through.

 

Nanofiltration system machine inquiry guides

To find the most appropriate for your use, please advise the following information ready
· Product water flow rate ( m3/hr, m3/day, Liter/hr,GPM,GPD etc.)
·Product water purpose(drinking, irrigation, industry process or others)
· Feed Water TDS (Total dissolved solids). Is it from Borehole/salt/brackish/lake water
· Power (110/220/380V/415V/460V, 50 or 60 Hz) 3 phase.
·  It is necessary to make water analysis reprot for borehole water,lake water, seawater.
·  If soure water is tap water no need end to us TDS or water analysis report.

Quickly discuss and reply you. My whatsapp +86 13798883773, +8613532836525