Reverse osmosis brackish bwro water treatment systems

brackish_water_ro
bwro_brackish_water_reverse_osmosis_system

Reverse osmosis brackish bwro water treatment systems

We categorize brackish water with a TDS of 2,000 ppm-15,000 ppm Brackish water comes from the desert, from wells with high salinity close to the ocean.

Brackish water treatment common treatment processes use reverse osmosis proecess:

Reverse Osmosis (RO) Technology

Reverse osmosis technology uses a semipermeable membrane to remove solutes (such as salts, heavy metals, etc.) from water under pressure. It is the most widely used desalination process.

25m3/hr reverse osmosis brackish bwro water treatment systems process detaisl

Brackish water treatment systm design as flows

1) Input water: Seawater, set TDS=10,000ppm

2) Output water: TDS less than 200ppm

3) Water temperature: 2—50℃

4) Production capacity: 600m3PD

5) Voltage: 415V/50Hz, 3 phase

6) Power supply:Single unit power need 53KW/single unit

7) Delivery: 40ft High 1 pcs

Reverse osmosis brackish system details: (for Quataer deep well water)

HY-BWRO 25m3/hr(600m3/D) 
Flow rate 600T/day Recovery rate 60%
Applicable power  380V/50HZ 3 phase Rated power 53KW
Feedwater TDS <15000ppm freshwater TDS <200ppm
Working pressure <2-3.0Mpa operating temperature 5-45℃
Feedwater residual chlorine <0.1ppm Feedwater SDI <5
Feedwater turbidity <1NTU Feedwater PH value 3-10
RO membrane housing 8040-6 core,5piece RO membrane  30 piece
Equipment specification 11X2.2X1.7m) Net weight /
Packing specification(Plywood) Need to 40ft container Gross weight         /

25m3/hr well water RO unit   (TDS 7530PPM)                        10m3/hr brackish water TDS 7000ppm

ro_water_unit Brackish_water_ro_treatment_reverse_osmosis_plant_hy

Inquiry bwro system brackish water reverse osmosis system Guides

To find the most appropriate for your use, please advise the following information ready
· Product water flow rate ( m3/hr, m3/day, Liter/hr,GPM,GPD etc.)
·Product water purpose(drinking, irrigation, industry process or others)
· Feed Water TDS (Total dissolved solids). Is it from Borehole/salt/brackish/lake water
· Power (110/220/380V/415V/460V, 50 or 60 Hz) 3 phase.
·  It is necessary to make water analysis reprot for borehole water,lake water, seawater.
·  If soure water is tap water no need end to us TDS or water analysis report.

“Quickly discuss and reply you. My ωhaτsαpp +8613532836525,+86 13798883773